Download Installation Guide

Term of warranty


Bitspower 1S VGA Water Block for NVIDIA GeForce RTX 20 Series

The Bitspower 1S VGA Water Block for NVIDIA GeForce RTX 20 Series is a specially designed VGA water block. The product is layered with a nickel and chromium plated copper base plate that is meticulously carved to provide the most comprehensive contact over the GPU and VRM area, keeping your graphics card performing at maximum power while making sure it doesn’t overheat. The block features a minimalist footprint, only taking up one slot and weighing 30% less than other similar blocks.



Thread : G1/4" x 2

Included :
1set of BP-VG2080RD1S
1pcs of Bracket
1pcs of Backplate
1set of Thermal PAD 
1set of Mounting Screws/Accessories

Dimension(LxWxH) : 62x62x37 MM

S1-PWM Pump Spec:

Rated voltage: 12V DC
Power consumption: 17W
Maximum flow: 960L/h
Maximum system temperature: 60 ° C
MTBF: 50,000 hours
Warranty: 2 years

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:

I wanna show off, but what's the support I'd need?


The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.


*** Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product. ***
*** From 15th March 2018, all of our installation guides will be provided electronically via an easy-to-use QR code attached to the packaging. ***
*** Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage which may damage the PC components, please perform a 24-hour leaking test with only the pump connected to the power supply. ***
*** When using the leak tester on a water cooling loop, in order to avoid product damage due to excessive pressure, the input pressure should not exceed 0.5kg/cm2 (bar). The leak tester must not be used when there is water in the loop or when the pump is running. If the product is damaged due to excessive pressure or incorrect use, Bitspower's product warranty will be null and void, and the cost of any damage to the hardware will be borne by the customer. ***
Last updated : 2021-02-19 10:50:02

Write a review

Please login or register to review

Bitspower S1 Pump PWM

  • Brand: Bitspower
  • Product Code: BPTA-PS1-PWM
  • Availability: In Stock
  • UPC: 885488062593
  • EAN: 4712914782595
  • TWD 2,170.00 ( Tax excl. )

 Contact sales