Download Installation Guide

Term of warranty


Bitspower Pre-bent 90-Degree Acrylic Hard Tube

During the building of a water-cooling system, bending tubes successfully often requires a high degree of experience and craftsmanship. It was with this in mind that Bitspower's developed our Pre-bent 90-Degree Acrylic Hard Tube, making building a new rig easier for water-cooling novices and experience builders alike. The acrylic tube has been curved at a 90-degree angle, the 90-degree angles with additional straight tubing of 220mm and 305mm on either side of the bend. The customer can simply cut the tubing to the appropriate length and install it in their water-cooling system.


Length : 220x305mm


Included :
4 pcs of Pre-bent 90-Degree acrylic Hard Tube OD12MM


Dimension(LxH) : 350x23.8 MM

Bitspower Mos Block for ASUS ROG Dominus Extreme(Copper Limited Edition)
The important components of your motherboards deserve to receive the best heat management possible, which is why Bitspower expertly designed the ASUS ROG Dominus Extreme Mos Block to simultaneously cool the VRMs. 
Made of copper, the top layer of the mos block offers not only an efficient water channel design, but also a unique look to complement your PC style, while the base layer is made of high quality copper and molded to tightly fit over the VRMs, offering the best heat transfer possible.
Recommended purchases: Bitspower Summit CPU Block for LGA 3647 (Narrow)Copper Limited Edition  

Thread : G1/4" x 2

Included :
1Set of Thermal PAD
1Set of Mounting Screws/Accessories


If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:

I wanna show off, but what's the support I'd need?


The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.


*** Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product. ***
*** From 15th March 2018, all of our installation guides will be provided electronically via an easy-to-use QR code attached to the packaging. ***
*** Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage which may damage the PC components, please perform a 24-hour leaking test with only the pump connected to the power supply. ***
*** When using the leak tester on a water cooling loop, in order to avoid product damage due to excessive pressure, the input pressure should not exceed 0.5kg/cm2 (bar). The leak tester must not be used when there is water in the loop or when the pump is running. If the product is damaged due to excessive pressure or incorrect use, Bitspower's product warranty will be null and void, and the cost of any damage to the hardware will be borne by the customer. ***
Last updated : 2020-12-10 17:30:02

Write a review

Please login or register to review

Bitspower Mos Block for ASUS ROG Dominus Extreme(Copper Limited Edition)

  • Brand: Bitspower
  • Product Code: BP-MSASDE-SL
  • Availability: In Stock
  • UPC: 885488063064
  • EAN: 4712914783066
  • TWD 3,968.00 ( Tax excl. )

 Contact sales