Download Installation Guide (All)

Term of warranty

Q&A

Bitspower Sedna O11D for LIAN LI O11 DYNAMIC (front)-PWM

For those of you looking to bring extra customization to your LIAN LI O11 DYNAMIC cases, Bitspower offers a customized reservoir and pump combo under the name of Bitspower Sedna O11DA. Designed to replace the front panel of the case, this distribution reservoir features a powerful S1 pump that will keep your liquid moving at the right pace, and a mirror silver finish, that will turn your case in a work of art.

With novice modders in mind, Bitspower designed a reservoir that is easy to install while providing a professional look. Equipped with multiple 1/4" water inlets and outlets to route the water from the radiator to the VGA than the CPU, this Bitspower customized reservoir also gives you more playroom for the graphics card location with a dual inlet/outlet designed to prevent having to bend more tubes and create a cleaner look to your loop.

The Bitspower Sedna O11DA, equipped with Bitspower Digital RGB, is sure to become the center of attention of your case with bright LEDs that are certified by ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome.

 

Features :

1. Digital RGB Effect Make Your Build More Unique.

2. Made By Hi-Quality Acrylic.

3.RoHS Compliant.

 

Dimension ( LxWxH ) : 420 x211 x77.4 mm

LED Color : Digital RGB

LED Strip Management By Bitspower Digital RGB And Certified By ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome and Razer Chroma

 

Compatibility :

Lian Li O11 DYNAMIC  (front)

 

Included :

1PCS of BPTA-EFW-GS

1PCS of TA-EXAIR-GS

1 PCS of  front plate

1SET of Mounting Screws/Accessories

 

S1 Pump Spec.

Rated voltage:12V DC

Power consumption:17W

Maximum flow:960L/h

Noise:40~45dBA

Maximum system temperature:60℃

PWM:Yes

Electric Connector:Molex 4 Pin

Warranty:2 years

 

Application Example:

https://www.youtube.com/watch?v=QDKuFj8KqBw 

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:
https://shop.bitspower.com/index.php?route=product/product&product_id=7044
 

I wanna show off, but what's the support I'd need?
RGB

The end of Power supply is 4PIN.The sequence is +/G/R/B (some motherboards are shown +12V/G/R/B). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.

image

DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.

image


*** Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product. ***
*** From 15th March 2018, all of our installation guides will be provided electronically via an easy-to-use QR code attached to the packaging. ***
*** Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage which may damage the PC components, please perform a 24-hour leaking test with only the pump connected to the power supply. ***
*** When using the leak tester on a water cooling loop, in order to avoid product damage due to excessive pressure, the input pressure should not exceed 0.5kg/cm2 (bar), and do not over 30 second. The leak tester must not be used when there is water in the loop or when the pump is running. If the product is damaged due to excessive pressure or incorrect use, Bitspower's product warranty will be null and void, and the cost of any damage to the hardware will be borne by the customer. ***
Last updated : 2023-10-19 11:58:48

Write a review

Please login or register to review

Bitspower Sedna O11D for LIAN LI O11 DYNAMIC (front)-PWM

  • Brand: Bitspower
  • Product Code: BPTA-WDPO11DA-PWM
  • UPC: 885488062968
  • EAN: 4712914782960
  • Availability: In Stock
  • TWD 6,600 ( Tax excl. )

 Contact sales