TITAN One 3.0-Included LIAN LI O11 DYNAMIC EVO Case, FSP HYDRO G PRO ATX3.0 1000W power supply, and CPU water cooling system

TITAN ONE 3.0 is perfect for anyone looking for a simple all-in-one solution. Bitspower has included a comprehensive series of components to ensure that the user is able to quickly and easily create a water-cooled system based on the hardware of their choice.

Everything you need

Included is everything you will need to build a water-cooled system—no need to purchase water-cooling components individually! In no time, you’ll have a dazzling rig with high-quality cooling components that pairs perfectly with great hardware.

Unleash The Power

In addition to the pre-installed radiator, fan, and reservoir, TITAN ONE 3.0 has been equip the FSP HYDRO G PRO 1000W power supply, which is ready for RTX 40 series graphics cards.The fully modular makes the assembly simple and easy.

Expansion So Easy

The Water distribution reservoir of TITAN ONE EVO 3.0 has more expandability. The water-cooling system needs more heat dissipation when installing a GPU water block. Radiators can be installed on the side and bottom of the chassis to improve heat dissipation efficiency.

Water distribution reservoir design

You can choose normal mode and reverse mode according to your choice for the chassis. For this reason, the water distribution reservoir is designed to be compatible with both modes.

Choose your hardware

You can choose your ideal CPU, motherboard, memory and HDD/SSD, and build your own water-cooled system based on your computing needs.

New innovative designs

With these two innovative designs, slider and adjustable accessories, no matter how the CPU and motherboard are combined, the TITAN ONE 3.0 is compatible with all of them.

Easy to install

By including pre-bent and cut tubes, one of the most complicated elements of creating a loop has been already taken care of—you just need to connect everything up and get cooling!

Compatible with latest CPU

The CPU Block can be quickly and easily installed on all modern CPU sockets and is compatible with most current Intel and AMD CPUs, including the latest Intel LGA 1700 socket and AMD Socket AM5.

O11 EVO case specification:
Please refer to the Lianli official website.
https://lian-li.com/zh-TW/product/o11-dynamic-evo/

LED Color : Digital RGB

LED Strip Management By Bitspower Digital RGB And Certified By ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, BIOSTAR VIVID LED DJ and Razer Chroma.

Included:
1 Set of LIAN LI O11D EVO Black Case
1 Set of FSP Power Supply 1000 Watts (Hydro G PRO 1000 ATX3.0)
1 Set of Water Distribution Plate with Motor BPTA-TO3O11DEVO-K1M (Pre-installed)
1 Set of AMD CPU Water Block BPTA-CPUMS-V2-SKA with Conversion Bracket for Intel
1 Set of 360 Copper Radiator BPTAN-NLS360-F2PB (Pre-installed)
3 Pcs of Fans BPTA-FX1812NT-1 (Pre-installed)
6 Pcs of OD16mm Hard Tube Fittings BPTA-DOTFH1622-GS
2 Pcs of Adjustable OD16mm Hard Tube Fittings BPTA-15ATFH16-GS
1 Set of LGA1700 Backplate BPTA-MKCPUMS-1700-V2
1 Set of AM5 Screws BP-CPUPDB-AMD5MS
1 Set of 90-degree OD16mm Pre-Bent Acrylic Tubes

K1M Pump specification:

Rated Voltage: 12V DC
Operation Voltage: 8 ~ 16V
Rated Current: 0.7A
Power consumption: 8.4W
Maximum flow: 7.7 LPM
System Temperature: -25 ~ 80 °C
Noise Level: 24dBA
MTBF: 15,000 hours

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Touchaqua Digital RGB Multi Function Controller", which is available for purchase via the link below:
https://shop.bitspower.com/index.php?route=product/product&product_id=7822

I wanna show off, but what's the support I'd need?

◆DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.