Bitspower Notos 120 Fan Digital RGB (5PCS)

The Notos 120 DRGB Fan has been uniquely designed by Bitspower in order to provide the most efficient cooling at a fantastic price. With a maximum speed rate of 1800RPM, which can be adjusted via the supported PWM, the 120x120x25mm fan is well suited to be paired with our radiators for efficient cooling. Equipped with vibration cancelation rubber pads on all four corners, rattling noises will be a thing of the pasty while you game, stream, watch a movie or work.

RGB enthusiasts will be pleased to know that the Notos 120 DRGB Fan features digital RGB LEDs around the center shaft, providing stunning lighting effects. In addition to being able to "daisy chain" the RGB interface of your fans, Bitspower has also had the product certified by ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, and Razer Chroma to ensure fully synchronized lighting of your system.

Included :
5pcs of BPTA-FX1812NT
1pcs of BPTA-DRGBMFC
1pcs of BPTA-PFANMFH

Rated Voltage: DC 12V.
Operation Voltage: Fan DC12V /LED DC 5V
Staring Voltage: Fan DC 7V
Fan Speed: 800~1800 RPM±10%
Noise Level: 25Dba max:28Dba
Life time:30000 Hours
No.of Blades: 7 leaves
LED Light Bar: 8pcs

Bitspower PWM FAN Multi Function HUB
https://shop.bitspower.com/index.php?route=product/product&product_id=7042&search=BP-PFANMFH

Features :
1.Support 10 Fans with PWM Function.
2.Direct control from BIOS or Motherboard software，when hub linked to Motherboard.
3.Power supply from SATA Connected.
4.LED Light for Power On.
5.Separate Capacitor to provide more stable current for PWM Fans.
6.Easy to Install in Chassis.

Color : Black

Input Voltage : 12V
Operating Temperature : <70ºC
Input : SATA Connected
Connection Socket : Small Four Pin

Pressing A+C simultaneously will turn on the auto cycling mode.
Pressing A again will stop the cycling mode and set the lighting to a specific color.

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:
https://shop.bitspower.com/index.php?route=product/product&product_id=7044
 

I wanna show off, but what's the support I'd need?

◆DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.