Bitspower Fan and Digital RGB RF Remote Controller Hub

The Fan and Digital RGB RF Remote Controller Hub is a tool launched by Bitspower for PC gaming enthusiasts. With integrated 5V Digital RGB and 4 pin PWM fan hub functionality, users can connect up to 5 PWM fans and 5 sets of 5V Digital RGB devices. In addition to complementing the existing connectors on the motherboard, it can also reduce the amount of cables surrounding the PC case.

Unlike ordinary controllers, the Bitspower Fan and Digital RGB RF Remote Controller Hub uses an RF (Radio Frequency) controller, which allows users to adjust the RGB devices connected to the hub without interference; also, users can get 100 dynamic modes and 11 static modes through the remote control.

In addition to the RF remote control, the Bitspower Fan and Digital RGB RF Remote Controller Hub can also be integrated with the 5V RGB Headers of various motherboard manufacturers, and use ASUS AURA Sync, GIGABYTE RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome, Biostar VIVID LED DJ and Razer Chroma to synchronize lighting effects with the motherboard.

The 4-pin PWM fan hub can also be directly connected in a series with the Fan Header on the motherboard, and controlled from the BIOS of the motherboard.

Specification：
Rated Voltage: DC 12V
Rated Current: <10mA
 

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:
https://shop.bitspower.com/index.php?route=product/product&product_id=7822

I wanna show off, but what's the support I'd need?

◆DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.