Bitspower Mono Block for ASRock Z390 Taichi

The most important components of your motherboards deserve to receive the best heat management possible, which is why Bitspower expertly designed the Intel Z390 series mono block to simultaneously cool the CPU and VRMs. Featuring a direct water injection design, the CPU is firstly chilled with the coldest water, then the liquid is redirected over the VRMs, keeping everything at a low temperature for maximum performance.

Made of clear acrylic, the top layer of the mono block offers not only an efficient water channel design, but also a unique look to complement your PC style, while the base layer is made of high quality copper and molded to tightly fit over the CPU and VRMs, offering the best heat transfer possible. Additionally, the Bitspower Intel Z390 series mono block is equipped with Bitspower Digital RGB LEDs, the Z390 series mono block is sure to become the center piece of your rig with its easy to control light effects.

Features :

1. Block TOP Cover Made of Hi-Quality Acrylic.

2. Block Base Made of Hi-Quality C1100 Copper.

3. Block Base with High Durability Nickel Finished in Silver.

4. RoHS Compliant.

Thread : G1/4" x 2

Dimension ( LxWxH ) : 119 x122 x27.6 mm

LED Color : Digital RGB

LED Strip Management By Bitspower Digital RGB And Certified By ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome and Razer Chroma

Included :

1 set of BP-MBASRZ390TC

1 set of Thermal PAD

1 set of Mounting Screws/Accessories.

Compatibility :

ASRock Z390 Taichi
ASRock - Z390 Taichi Ultimate
ASRock Z390 Phantom Gaming 9

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:
https://shop.bitspower.com/index.php?route=product/product&product_id=7044

I wanna show off, but what's the support I'd need?
◆RGB

The end of Power supply is 4PIN.The sequence is +/G/R/B (some motherboards are shown +12V/G/R/B). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.

◆DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.

*** Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product. ***

*** From 15th March 2018, all of our installation guides will be provided electronically via an easy-to-use QR code attached to the packaging. ***

*** Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage which may damage the PC components, please perform a 24-hour leaking test with only the pump connected to the power supply. ***

*** When using the leak tester on a water cooling loop, in order to avoid product damage due to excessive pressure, the input pressure should not exceed 0.5kg/cm2 (bar), and do not over 30 second. The leak tester must not be used when there is water in the loop or when the pump is running. If the product is damaged due to excessive pressure or incorrect use, Bitspower's product warranty will be null and void, and the cost of any damage to the hardware will be borne by the customer. ***

Last updated : 2024-10-29 09:40:40