Download Installation Guide (All)

Term of warranty

Q&A

Bitspower CPU Block Summit ELX for AMD TRX40/TRX50 Platform with OLED

With high processing power comes the need for heat management. In order to keep your AMD 3rd Gen Ryzen Threadripper processor under optimum working conditions, Bitspower has developed a new water block for the socket sTRX4 with its Bitspower CPU Block Summit ELX for AMD TRX40/TRX50 Platform with OLED. Additionally, it's also compatible with previous Ryzen Threadripper series.

 

With its clean look and high-density heat sink fin design, this water block promises stunning visuals, as well as superior performance. The two-way tunnel design alleviates the difficulties in routing waterways, allowing for an easy and streamlined water cooling system.

Fashioned with a metal top layer and a copper base plate, the Bitspower CPU Block Summit ELX for AMD TRX40/TRX50 Platform with OLED features a narrow footprint to ensure it doesn't interfere with the RAM slots.

The Bitspower CPU Block Summit ELX for AMD TRX40 Platform with OLED, equipped with Bitspower Digital RGB around the top plate, is sure to become the center of attention of your case with bright LEDs that are certified by ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, and Razer Chroma.

 

 

LED Color : Digital RGB

LED Strip Management By Bitspower Digital RGB And Certified By ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, BIOSTAR VIVID LED DJ and Razer Chroma

 

Thread : G1/4" x 2


Digit thermal sensor

Input Voltage : DC 5V~12V
Temperature : 0~99°C(32~210.2°F)
operate current : <20ma

 

Included :
1Set BP-CPUELXTRX40-OLED
1Set Mounting Screws/Accessories


Compatibility :
AMD X399
AMD TRX40
AMD TRX50



Dimension(LxWxH) : 117x75x21.7 MM

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:
https://shop.bitspower.com/index.php?route=product/product&product_id=7044
 

I wanna show off, but what's the support I'd need?

DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.

image

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:
https://shop.bitspower.com/index.php?route=product/product&product_id=7822

I wanna show off, but what's the support I'd need?

◆DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.

image


*** Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product. ***
*** From 15th March 2018, all of our installation guides will be provided electronically via an easy-to-use QR code attached to the packaging. ***
*** Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage which may damage the PC components, please perform a 24-hour leaking test with only the pump connected to the power supply. ***
*** When using the leak tester on a water cooling loop, in order to avoid product damage due to excessive pressure, the input pressure should not exceed 0.5kg/cm2 (bar), and do not over 30 second. The leak tester must not be used when there is water in the loop or when the pump is running. If the product is damaged due to excessive pressure or incorrect use, Bitspower's product warranty will be null and void, and the cost of any damage to the hardware will be borne by the customer. ***
Last updated : 2024-05-20 10:00:02

Write a review

Please login or register to review

Bitspower CPU Block Summit ELX for AMD TRX40/TRX50 Platform with OLED

  • Brand: Bitspower
  • Product Code: BP-CPUELXTRX40-OLED
  • UPC: 885488065976
  • EAN: 4712914785978
  • Availability: In Stock
  • TWD 4,200 ( Tax excl. )

 Contact sales