Download Installation Guide (All)

Term of warranty


Bitspower Digital Flow Meter Display

The Bitspower Digital Flow Meter Display can be easily integrated into your water cooling system and allows for real time monitoring of your loop’s flow—the perfect accessory for complex water cooling systems. Simply connect the flow meter to the coolant channel and use the SATA power supply. The sensor detects the water flow and immediately displays the water flow on the OLED panel. In addition to providing a visual representation of the flow level, the product also provides an audible alarm: if the flow rate of water is less than 0.5 liters per minute, a warning alarm will ring out, while a warning symbol will also appear on the OLED panel. With the Bitspower Digital Flow Meter Display, you can rest assured that you’ll stop leaks dead in their tracks!



Thread : G1/4"
Operate voltage : DC 4.5V~5.5V
Flow : 0.5-30.0 LPM±5%
Operate current : <200 mA
Wire Max Heat Resistance Temp: 80C

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:

I wanna show off, but what's the support I'd need?


The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.


*** Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product. ***
*** From 15th March 2018, all of our installation guides will be provided electronically via an easy-to-use QR code attached to the packaging. ***
*** Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage which may damage the PC components, please perform a 24-hour leaking test with only the pump connected to the power supply. ***
*** When using the leak tester on a water cooling loop, in order to avoid product damage due to excessive pressure, the input pressure should not exceed 0.5kg/cm2 (bar), and do not over 30 second. The leak tester must not be used when there is water in the loop or when the pump is running. If the product is damaged due to excessive pressure or incorrect use, Bitspower's product warranty will be null and void, and the cost of any damage to the hardware will be borne by the customer. ***
Last updated : 2024-04-02 10:20:04

Write a review

Please login or register to review

Bitspower Digital Flow Meter Display

  • Brand: Bitspower
  • Product Code: BP-FMD
  • UPC: 885488066768
  • EAN: 4712914786760
  • Availability: In Stock
  • TWD 1,800 ( Tax excl. )

 Contact sales