Download Installation Guide (All)

Term of warranty


Bitspower Sedna PH518 Kit Set for Phanteks ENTHOO EVOLV X GLASS Case

Included is everything you'll need to custom water-cool your CPU inside your Phanteks ENTHOO EVOLV X GLASS Case. Combining a water distribution reservoir, a pump, a radiator, high performance fans, and the CPU and VGA block, this kit has everything you need to make your PC look amazing while keeping temperatures totally under control.

With novice modders in mind, Bitspower designed a distribution reservoir that is easy to install while providing a professional look. Equipped with multiple water inlets and outlets to route the water from the radiator to the VGA and the CPU, this reservoirs also gives you more playroom for the graphics card location with the special inlet/outlet designed to prevent having to bend more tubes and create a cleaner look to your loop.

The Bitspower Sedna PH518 Kit Set for Phanteks ENTHOO EVOLV X GLASS Case, equipped with Bitspower Digital RGB, is sure to become the center of attention of your case with bright LEDs that are certified by ASUS AURA Sync, GIGABYTE RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome, BIOSTAR VIVID LED DJ, and Razer Chroma.



Compatibility :


LED Color : Digital RGB

LED Strip Management By Bitspower Digital RGB And Certified By ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, BIOSTAR VIVID LED DJ and Razer Chroma.


Included :
1set of BPTA-WDPPH518-R-PWM
1set of BPTAN-NLS360-F2PB
1set of BPTAN-NLS240-F2PB
1set of BP-VG2080RD-A2
2set of BPTA-FX1812NT-3
8set of BPTA-DOTFH1420-GS
3set of BPTA-90RE-GS
2set of BPTA-F95-GS
2set of BPTA-F06-GS
2set of TA-F40-GS
8pcs of BP-NCCLT14AC-L500
1set of BP-WTP-J03


This image is for reference purposes only - not the actual finished product.



If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:

I wanna show off, but what's the support I'd need?


The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.


*** Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product. ***
*** From 15th March 2018, all of our installation guides will be provided electronically via an easy-to-use QR code attached to the packaging. ***
*** Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage which may damage the PC components, please perform a 24-hour leaking test with only the pump connected to the power supply. ***
*** When using the leak tester on a water cooling loop, in order to avoid product damage due to excessive pressure, the input pressure should not exceed 0.5kg/cm2 (bar), and do not over 30 second. The leak tester must not be used when there is water in the loop or when the pump is running. If the product is damaged due to excessive pressure or incorrect use, Bitspower's product warranty will be null and void, and the cost of any damage to the hardware will be borne by the customer. ***
Last updated : 2023-10-25 15:20:29

Write a review

Please login or register to review

Bitspower Sedna PH518 Kit Set for Phanteks ENTHOO EVOLV X GLASS Case

  • Brand: Bitspower
  • Product Code: BPTA-WDPPH518-KIT
  • UPC: 885488066751
  • EAN: 4712914786753
  • Availability: In Stock
  • TWD 21,000 ( Tax excl. )

 Contact sales