Download Installation Guide

Term of warranty

Q&A

Bitspower Premium Summit M Mystic Black Limited Edition (Compatible with 1700)

Bitspower brings an efficient and stylish solution for CPU water cooling with the Bitspower Premium Summit M Mystic Black Metal Edition. Including brackets and accessories for both Intel and AMD platforms, this CPU block is all you’ll need to keep your processor from overheating. Fashioned with high quality copper, this CPU block will bring a unique accent to your rig.

In order to make heat exchange as efficient as possible, the copper base plate features a layer of 0.3mm fins/channels to increase the surface area, which is essential for heat dissipation. Then, the Bitspower water injection design brings a high flow of coolant directly on top of these fins for immediate cooling.

The Bitspower Premium Summit M Mystic Black Metal Edition, equipped with Bitspower Digital RGB around the top plate, is sure to become the center of attention of your case with bright LEDs that are certified by ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, and Razer Chroma.

 

Thread : G1/4" x 2

 

LED Color : Digital RGB

LED Strip Management By Bitspower Digital RGB And Certified By ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, BIOSTAR VIVID LED DJ and Razer Chroma

Included :
1Set of CPU Backplate
1Pcs of AMD Bracket
1Pcs of AMD X399 Bracket
1Set of Mounting Screws/Accessories

 

Use the backplate BPTA-MKCPUMS-1700, Compatible With LGA1700, only Included in the Limited Edition. 

 



Dimension(LxWxH) : 95x95x19 MM

BrandProduct
INTELLGA 775
INTELLGA 115X
INTELLGA 1200
INTELLGA 1366
INTELLGA 1700
INTELLGA 2011
INTELLGA 2011-V3
INTELLGA 2066
AMDSOCKET 754
AMDSOCKET 939
AMDSOCKET 940
AMDSOCKET AM3 / AM3+
AMDSOCKET AM2 / AM2+
AMDSOCKET FM1 / FM2+
AMDSOCKET TR4
AMDSOCKET AM4

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:
https://shop.bitspower.com/index.php?route=product/product&product_id=7044
 

I wanna show off, but what's the support I'd need?

DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.

image

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:
https://shop.bitspower.com/index.php?route=product/product&product_id=7822

I wanna show off, but what's the support I'd need?

◆DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.

image


*** Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product. ***
*** From 15th March 2018, all of our installation guides will be provided electronically via an easy-to-use QR code attached to the packaging. ***
*** Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage which may damage the PC components, please perform a 24-hour leaking test with only the pump connected to the power supply. ***
*** When using the leak tester on a water cooling loop, in order to avoid product damage due to excessive pressure, the input pressure should not exceed 0.5kg/cm2 (bar), and do not over 30 second. The leak tester must not be used when there is water in the loop or when the pump is running. If the product is damaged due to excessive pressure or incorrect use, Bitspower's product warranty will be null and void, and the cost of any damage to the hardware will be borne by the customer. ***
Last updated : 2024-03-19 12:00:06

Write a review

Please login or register to review

Bitspower Premium Summit M Mystic Black Limited Edition (Compatible with 1700)

  • Brand: Bitspower
  • Product Code: BPPRE-CPUMMB-BK
  • UPC: 885488063828
  • EAN: 4712914783820
  • Related Products:
  • Bitspower Premium Summit M Silver Moon Limited Edition (Compatible with 1700)
  • Availability: In Stock
  • TWD 4,030 ( Tax excl. )

 Contact sales