Download Installation Guide

Term of warranty

Q&A

Bitspower Phantom CPU Air Cooler with 4 Heat Pipes - Silver (DRGB)

The Bitspower Phantom CPU Air Cooler with 4 Heat Pipes - Silver (DRGB) is an ideal cooling solution for your CPU. It uses a classic aluminum fin tower radiator, while the heatsink design utilizes four copper heat pipes that make direct contact with the base of the CPU, pulling heat to the aluminum fin-stack which is dissipated by a 120mm fan.

These heat pipes and aluminum fins provide highly efficient heat dissipation. The product’s 120mm fan features fluid-dynamic bearings, spinning at speeds up to 1,800 RPM, pushing airflow at a rate of 80CFM, while operating at a maximum volume of 34dBA.

The Bitspower Phantom CPU Air Cooler with 4 Heat Pipes - Silver (DRGB) can be quickly and easily installed on all modern CPU sockets and is compatible with most current Intel and AMD CPUs, including the latest 12th Gen Intel Core Processor (LGA 1700 socket).

 

 

LED Color : Digital RGB

LED Strip Management By Bitspower Digital RGB And Certified By ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, BIOSTAR VIVID LED DJ and Razer Chroma.

Specification
DIMENSIONL116 x W51 x H158 mm (w/o fan)
WEIGHT500g (w/o fan)
HEAT PIPESØ 6mm x 4pcs
FIN PCS50 pcs
TDP200W

 

Included :
1set of BPA-PHSL-4H1T-DRGB
1set of  BPA-TP1-2.5G
1set of Mounting Screws/Accessories

 

 

Specification:

DIMENSION : L116 x W51 x H158 mm (w/o fan)
WEIGHT : 500g (w/o fan)
HEAT PIPES : Ø 6mm x 4pcs
FIN PCS : 50 pcs
TDP : 200W 
 

 

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Touchaqua Digital RGB Multi Function Controller", which is available for purchase via the link below:
https://shop.bitspower.com/index.php?route=product/product&product_id=7822

I wanna show off, but what's the support I'd need?

◆DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.

image


*** Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product. ***
*** From 15th March 2018, all of our installation guides will be provided electronically via an easy-to-use QR code attached to the packaging. ***
*** Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage which may damage the PC components, please perform a 24-hour leaking test with only the pump connected to the power supply. ***
*** When using the leak tester on a water cooling loop, in order to avoid product damage due to excessive pressure, the input pressure should not exceed 0.5kg/cm2 (bar), and do not over 30 second. The leak tester must not be used when there is water in the loop or when the pump is running. If the product is damaged due to excessive pressure or incorrect use, Bitspower's product warranty will be null and void, and the cost of any damage to the hardware will be borne by the customer. ***
Last updated : 2024-01-29 15:20:02

Write a review

Please login or register to review

Bitspower Phantom CPU Air Cooler with 4 Heat Pipes - Silver (DRGB) LGA1700

  • Brand: Bitspower
  • Product Code: BPA-PHSL-4H1T-DRGB
  • UPC: 885488068632
  • EAN: 4712914788634
  • Availability: In Stock
  • TWD 1,450 ( Tax excl. )

 Contact sales